Butterfly Valve
-
Worm Gear Wafer Butterfly Valve with Nylon Covered Disc
The nylon disc butterfly valve and nylon plate have good anti-corrosion and epoxy coating is used on the surface of the plate, it has very good anti-corrosion and wear resistance. The use of nylon plates as butterfly valve plates allows butterfly valves to be used in more than just simple non-corrosive environments, broadening the scope of the use of butterfly valves.
-
Brass Bronze Wafer Butterfly Valve
Brass wafer butterfly valves, usually used in the marine industry, good corrosion resistance, usually are aluminum bronze body, aluminum bronze valve plate. ZFA valve has ship valve experience, to Singapore, Malaysia and other countries have supplied ship valve.
-
NBR Seat Flange Butterfly Valve
NBR has good oil resistance, usually if the medium is oil, we will preferably choose NBR material as the seat of the butterfly valve, of course, his medium temperature should be controlled between -30℃~100℃, and the pressure should not be higher than PN25.
-
Electric Rubber Full Lined Flange Type Butterfly Valve
The fully rubber-lined butterfly valve is a good addition to the customer’s budget when they cannot afford to use 316L, super duplex steel, and the medium is slightly corrosive and in low-pressure conditions.
-
Concentric Cast Iron Full Lined Butterfly Valve
Concentric PTFE Lining Valve also known as fluorine plastic lined corrosion resistant valves, are fluorine plastic molded into the inner wall of the steel or iron valve bearing parts or the outer surface of the valve inner parts. Fluorine plastics here mainly include: PTFE, PFA, FEP and others. FEP lined butterfly, teflon coated butterfly valve and FEP lined butterfly valve are usually used in strong corrosive media.
-
Pneumatic Wafer Type Triple Offset Butterfly Valve
Wafer type triple offset butterfly valve has the advantage of being resistant to high temperatures, high pressure and corrosion. It is a hard seal butterfly valve, usually suitable for high temperature（≤425℃）, and the Maximum pressure can be 63bar. The structure of the wafer type triple eccentric butterfly valve is shorter than the flang triple eccentric butterfly valve, so the price is cheaper.
-
DN50-1000 PN16 CL150 Wafer Butterfly Valve
In the ZFA valve, the size of the wafer butterfly valve from DN50-1000 is usually exported to the United States, Spain, Canada, and Russia. butterfly valve products of ZFA, well-liked by customers.
-
Worm Gear DI Body Lug Type Butterfly Valve
Worm Gear also called gearbox or hand wheel in butterfly valve. Ductile Iron body lug type butterfly valve with worm gear is common used in water valve for pipe. From DN40-DN1200 even larger lug type butterfly valve, we also can use the worm gear to open and close the butterfly valve. Ductile Iron body is suitable for a wide range of medium.Such as water, wast water,oil and etc.
-
Lug Type Triple Offset Butterfly Valve
Lug type triple offset butterfly valve is a kind of metal seat butterfly valve. Depending on the working conditions and the medium, different materials can be selected, such as Carbon steel, stainless steel,duplex steel and alum-bronze. And the actuator can be hand wheel, electric and pneumatic actuator. And the lug type triple offset butterfly valve are suitable for pipes larger than DN200.
